Many composers who mostly write for samples (and therefore might not have much session experience) are daunted by their first scoring session and are not sure how to best approach the session in terms of preparation. Hopefully, by the end of this blog, you’ll have more of an idea of what things to watch out for and the best way in which you can prepare for a smooth recording session.
I cannot even begin to stress how important a cue sheet is to everyone at a recording session. It’s the document that will aid you from going into overtime and will be the lifeline that you might need at the end of a trying day.
Above is what a standard cue sheet looks like for a small TV recording session. You’ll see that it has all of the information on there that you need to keep yourself out of trouble.
Be sure to include the following information:
CUE NAME / ID (for example 1M01)
TIMECODE IN AND OUT TIME
NOTES FROM THE SPOTTING SESSION
BOXES TO STATE AT WHICH POINT IN THE PROCESS YOU HAVE REACHED WHILST YOU ARE WORKING. FOR EXAMPLE, ALL BOXES SHOULD BE GREEN AND ‘APPROVED’ BEFORE YOU REACHED THE ‘PRINTED’ BOX.
BOXES FOR MIDI AND STEMS CREATION.
BOXES FOR EACH INSTRUMENT/SECTION SO THAT YOU CAN SEE WHAT INSTRUMENT IS PLAYING IN EACH CUE
When you have completed each task: composing, copying, orchestration etc, you need to mark them ‘green’ and ‘approved’ immediately. This will help you to keep track of where you are during the process before the session has even taken place. The MIDI always needs to be bounced for the engineer to prepare the Pro Tools session at the studio (usually the night before the session), using all of the time signature and tempo information but deleting the actual MIDI data because that’s irrelevant at the actual session.
The stems also need to be bounced, usually in groups like strings, brass, percussion etc (or whatever forces you’re using) so that the engineer can feed the players the ‘prelays’ (basically anything that is staying in the mix and not being replaced by live players like synths etc) through their headphones along with the click track.
THE IMPORTANCE OF INCLUDING ‘CUE DURATION’
The cue duration is probably one of the most important pieces of information on the whole spreadsheet because it will help you to keep track of exactly how long each cue should be taking you to record. For example, if a 30 second cue is taking you 15 minutes to nail and you’ve only got 3 hours to record and 18 more cues to get through at 2 minutes per track, that’s going to be quite a big problem…
It’s always best to start the session off with a medium length cue and with most, if not all of the orchestra playing so that the engineer can set the levels and double check if there are faulty mics. I’ve then found that sometimes it can be beneficial to get through a few of the longer cues before moving onto the shorter cues which can take the pressure off nearer to the end of the session.
PASS THE BRASS
One thing to watch out for if you have a brass section is making sure that their lips don’t get tired. It may sound a bit childish, but if the brass are blowing on huge actions cues at fortissimo repeatedly, they’ll eventually get so tired that fortissimo will just become forte or less. For this reason, it’s best to make sure that you alternate between easier and harder cues.
Sometimes it can be best to hire a producer for bigger sessions so that you can leave them to keep track of timings and leave the orchestrator to focus solely on the music, listen out for intonation issues, the general performance and anything that they might want to adjust after communicating with the composer.
TIMECODE IN AND OUT
Once, at an orchestral session at Abbey Road, the picture in the cue was starting too early and had been misaligned by the engineer in the Pro Tools session when importing it. The composer noticed whilst he was conducting and they used the TC in and out time from the cue sheet to check at which point the picture should actually start. It was promptly fixed within 30 seconds and the panic was over. However, had the TC not been included in the cue sheet, there could’ve been a big panic about what was going on and if the music itself was actually incorrect. This is why it’s important to include this sort of information. In fact, my rule of thumb is that the more information you can include on the cue sheet the better. It’ll help you when you need it most.
I could write for days about sessions, but hopefully this gives you more of an idea of what to look out for/keep track of at the future sessions. If you’re one of those composers who hasn’t experienced their first live session yet, I really hope this is useful and helps you to get through it smoothly!