HOW TO APPROACH A SCORING SESSION

Many composers who mostly write for samples (and therefore might not have much session experience) are daunted by their first scoring session and are not sure how to best approach the session in terms of preparation. Hopefully, by the end of this blog, you’ll have more of an idea of what things to watch out for and the best way in which you can prepare for a smooth recording session.

CUE SHEETS

I cannot even begin to stress how important a cue sheet is to everyone at a recording session. It’s the document that will aid you from going into overtime and will be the lifeline that you might need at the end of a trying day.

TEST.jpg

Above is what a standard cue sheet looks like for a small TV recording session. You’ll see that it has all of the information on there that you need to keep yourself out of trouble.

Be sure to include the following information:

  • CUE NAME / ID (for example 1M01)

  • TIMECODE IN AND OUT TIME

  • NOTES FROM THE SPOTTING SESSION

  • CUE DURATION

  • BOXES TO STATE AT WHICH POINT IN THE PROCESS YOU HAVE REACHED WHILST YOU ARE WORKING. FOR EXAMPLE, ALL BOXES SHOULD BE GREEN AND ‘APPROVED’ BEFORE YOU REACHED THE ‘PRINTED’ BOX.

  • BOXES FOR MIDI AND STEMS CREATION.

  • BOXES FOR EACH INSTRUMENT/SECTION SO THAT YOU CAN SEE WHAT INSTRUMENT IS PLAYING IN EACH CUE

When you have completed each task: composing, copying, orchestration etc, you need to mark them ‘green’ and ‘approved’ immediately. This will help you to keep track of where you are during the process before the session has even taken place. The MIDI always needs to be bounced for the engineer to prepare the Pro Tools session at the studio (usually the night before the session), using all of the time signature and tempo information but deleting the actual MIDI data because that’s irrelevant at the actual session.

The stems also need to be bounced, usually in groups like strings, brass, percussion etc (or whatever forces you’re using) so that the engineer can feed the players the ‘prelays’ (basically anything that is staying in the mix and not being replaced by live players like synths etc) through their headphones along with the click track.

THE IMPORTANCE OF INCLUDING ‘CUE DURATION’

The cue duration is probably one of the most important pieces of information on the whole spreadsheet because it will help you to keep track of exactly how long each cue should be taking you to record. For example, if a 30 second cue is taking you 15 minutes to nail and you’ve only got 3 hours to record and 18 more cues to get through at 2 minutes per track, that’s going to be quite a big problem…

It’s always best to start the session off with a medium length cue and with most, if not all of the orchestra playing so that the engineer can set the levels and double check if there are faulty mics. I’ve then found that sometimes it can be beneficial to get through a few of the longer cues before moving onto the shorter cues which can take the pressure off nearer to the end of the session.

PASS THE BRASS

One thing to watch out for if you have a brass section is making sure that their lips don’t get tired. It may sound a bit childish, but if the brass are blowing on huge actions cues at fortissimo repeatedly, they’ll eventually get so tired that fortissimo will just become forte or less. For this reason, it’s best to make sure that you alternate between easier and harder cues.

Sometimes it can be best to hire a producer for bigger sessions so that you can leave them to keep track of timings and leave the orchestrator to focus solely on the music, listen out for intonation issues, the general performance and anything that they might want to adjust after communicating with the composer.

TIMECODE IN AND OUT

Once, at an orchestral session at Abbey Road, the picture in the cue was starting too early and had been misaligned by the engineer in the Pro Tools session when importing it. The composer noticed whilst he was conducting and they used the TC in and out time from the cue sheet to check at which point the picture should actually start. It was promptly fixed within 30 seconds and the panic was over. However, had the TC not been included in the cue sheet, there could’ve been a big panic about what was going on and if the music itself was actually incorrect. This is why it’s important to include this sort of information. In fact, my rule of thumb is that the more information you can include on the cue sheet the better. It’ll help you when you need it most.

SOUNDING OFF

I could write for days about sessions, but hopefully this gives you more of an idea of what to look out for/keep track of at the future sessions. If you’re one of those composers who hasn’t experienced their first live session yet, I really hope this is useful and helps you to get through it smoothly!

HOW TO STREAMLINE YOUR WORKFLOW WHEN WORKING WITH AN ORCHESTRATOR

STREAMLINING THE PROCESS

Often, when working with a composer (especially one who hasn't had much experience working in a studio environment with session musicians), I'm asked what the deliverables are to make the process as streamlined as possible. The following may not seem particularly important, but it is definitely something to get right as early as possible in the process to avoid any confusion for either yourself or the orchestrator.

GETTING YOUR DAW TEMPLATE SET UP CORRECTLY

Undoubtedly, one of the most important things a composer can do at the start of the process when working on a television series or feature film etc is to get their template set up in orchestral order. Take note of the following and I will explain my reasoning shortly.

From the top of your template to the bottom, your orchestral template should look like this screenshot below:

edited.jpg

I prefer sessions to be laid out this way because, as an orchestrator, I am required to sort through a seriously large amount of tracks and when I copy the quantized MIDI from Sibelius into my template Sibelius file (the file where all of my custom engraved fonts and instruments are laid out), I can almost copy line by line from top to bottom, rather than having to keeping scrolling up and down and then copying into the template file. For example, if the flute part is at the top of the session and then the oboe is down at the bottom where the double basses are, it means that I'm scrolling constantly trying to find where things are which wastes time. I’m happy to do that myself and this certainly isn't a complaint, but it'll cost the client more money and mean that the time I spend sorting through means I inevitably spend less time actually orchestrating.

It is really important to remove any variables and potential things that could be confusing which might slow an orchestrator down. For this reason, it's far easier to set up your DAW session in orchestral order from the start.

WHAT FILES SHOULD YOU SEND TO AN ORCHESTRATOR?

  • A MIDI FILE PER CUE/DAW SESSION PER CUE

I actually prefer that the composer sends me their whole DAW session if they're working within Cubase, which is the DAW I use to quantize MIDI. It means that there can be no errors with the MIDI and usually all of the tracks have been coloured and are easy on the eye rather than an imported session of pure grey MIDI. I would recommend making a duplicate of all of your DAW sessions and adding '_ORCH' at the end.

For example:

CUE ID_CUE TITLE_ORCH

1M23_DARK FORCES_ORCH

unnamed+%281%29.jpg

This ensures that your original DAW files are always untouched. If I end up re-barring anything in my Cubase session, I tell the composer about it so that they can change it in their original DAW session for later reference.

  • TEXT FILES

Sometimes MIDI can bare very little relation to the actual audio that you're hearing and sometimes it can be wise for the composer to write a quick text document describing what particular sound they might be aiming for. This can be useful when the audio isn't exactly what they'd like to be recorded live, and the MIDI is no use to the orchestrator either. If you didn't write a text note here, the orchestrator would use their initiative and do what they think is best for the context, or they would call/email the composer and potentially waste their time or distract them from something important.

Often, if something in particular keeps appearing in a score, it is wise for the composer to inform the orchestrator that this is going to keep occurring. For example, on one film I worked on, the composer mentioned that whenever a certain theme was used, the minim in the second half of the third bar  was meant to be two crotchets. The reason the composer had just played a minim instead of two crotchets was because of the slow attack of the string samples.


For the full blog, please visit:

http://filmscoringtips.com/help-your-orchestrator-help-you/?fbclid=IwAR3vcK-dgOXBqk_MsW__62427Ty7UihFEIYLmIZHUKJWd0p8Pvp0Ii2Sbpk

Hopefully this has cleared a dark cloud of confusion as to what you need to provide when working with an orchestrator!